Skip to content

Local water dashboard

Official source aggregation

Water quality in Hays, NC 28635

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wilkes County.

No active health-based violation reported
Primary matched system
Blue Ridge Water Association
Source water
Surface water
County
Wilkes County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

267.5 PPM · 15.6 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 8,486 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

267.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

267.5

mg/L as CaCO₃ equivalent

Grains per gallon

15.6

1 GPG ≈ 17.1 PPM

What this means at home

At 267.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

6

Nearest site

72.1 mi

Observation range

Aug 30, 2016–Oct 18, 2023

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: TRIB BELOW SELENIUM TREATMENT PONDS NO. 8 GARY, WV (Stream).USGS source documentation ↗

Regional context

Is 28635 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Hays median

268 PPM

About the same

1 indexed ZIP readings · Range 267.5–267.5 PPM

North Carolina median

41 PPM

227 PPM higher

519 indexed ZIP readings · Range 4.7–267.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
2
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
LEAD AND COPPER RULE REVISIONSNC0197030ResolvedOct 17, 2024through May 9, 2025
LEAD AND COPPER RULE REVISIONSHealth-basedNC0197030ResolvedOct 17, 2024through May 9, 2025

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Hays ZIP 28635 using 267.5 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

267.5 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Hays

Is tap water safe in Hays?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 267.5 PPM, or 15.6 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 267.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.