Skip to content

Local water dashboard

Official source aggregation

Water quality in Morganton, NC 28655

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Burke County.

No active health-based violation reported
Primary matched system
Morganton City Of
Source water
Surface water
County
Burke County
Profile updated

At a glance

What the current records say

Hardness

Soft

31.8 PPM · 1.9 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

4 systems

Serves 27,221 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

31.8 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

31.8

mg/L as CaCO₃ equivalent

Grains per gallon

1.9

1 GPG ≈ 17.1 PPM

What this means at home

At 31.8 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

2

Nearest site

63.2 mi

Observation range

Jul 20, 2016–Apr 3, 2018

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: FISHING CREEK AT HWY 5 BELOW YORK, SC (Stream).USGS source documentation ↗

Regional context

Is 28655 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Morganton median

32 PPM

About the same

1 indexed ZIP readings · Range 31.8–31.8 PPM

North Carolina median

41 PPM

9 PPM lower

519 indexed ZIP readings · Range 4.7–267.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
4
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Total Haloacetic Acids (HAA5)NC0112015AddressedApr 1, 2026through Jun 30, 2026
TTHMNC0112015AddressedApr 1, 2026through Jun 30, 2026
Consumer Confidence RuleNC0112148ResolvedJul 1, 2024through Dec 3, 2024
Lead and Copper RuleNC0112015ResolvedJan 1, 2023through Mar 6, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Morganton ZIP 28655 using 31.8 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Morganton

Is tap water safe in Morganton?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 31.8 PPM, or 1.9 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.