Skip to content

Local water dashboard

Official source aggregation

Water quality in Pinebluff, NC 28373

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Moore County.

2 reported benchmark flags
Primary matched system
Southern Pines, Town Of
Source water
Surface water + Groundwater
County
Moore County
Profile updated

At a glance

What the current records say

Hardness

Soft

46.6 PPM · 2.7 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

4 systems

Serves 24,102 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

46.6 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

46.6

mg/L as CaCO₃ equivalent

Grains per gallon

2.7

1 GPG ≈ 17.1 PPM

What this means at home

At 46.6 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

44

Nearest site

45.1 mi

Observation range

Jan 15, 2016–Jun 9, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: HAW R BELOW B. EVERETT JORDAN DAM NR MONCURE, NC (Stream).USGS source documentation ↗

Regional context

Is 28373 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Pinebluff median

47 PPM

About the same

1 indexed ZIP readings · Range 46.6–46.6 PPM

North Carolina median

41 PPM

6 PPM higher

519 indexed ZIP readings · Range 4.7–267.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass2 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

1.6 mg/L

Reported Jun 30, 2013

Numerical coverage

3 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.6

EPA limit 1.3

Local level is 123% of the listed EPA limit.

Total Haloacetic Acids (HAA5)

Measured in MG/L

Fail

Local 0.069

EPA limit 0.06

Local level is 115% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
12
Health-based
3
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Combined Radium (-226 and -228)NC0363030ResolvedJan 1, 2025through Mar 31, 2025
LEAD AND COPPER RULE REVISIONSHealth-basedNC0363010ResolvedOct 17, 2024through Nov 7, 2024
LEAD AND COPPER RULE REVISIONSNC0363010ResolvedOct 17, 2024through Nov 7, 2024
LEAD AND COPPER RULE REVISIONSNC0363151ResolvedOct 17, 2024through Dec 31, 2024
LEAD AND COPPER RULE REVISIONSHealth-basedNC0363151ResolvedOct 17, 2024through Dec 31, 2024
TTHMNC0363151ResolvedApr 1, 2024through Jun 30, 2024
Total Haloacetic Acids (HAA5)NC0363151ResolvedApr 1, 2024through Jun 30, 2024
Consumer Confidence RuleNC0363030ResolvedJul 1, 2023through Nov 17, 2023
Total Haloacetic Acids (HAA5)Health-basedReported 0.069 MG/L · MCL 0.06NC0363151ResolvedJan 1, 2023through Mar 31, 2023
Lead and Copper RuleNC0363153ResolvedJan 1, 2022through Mar 18, 2022
Public NoticeNC0363010AddressedJul 16, 2017
Revised Total Coliform RuleNC0363010AddressedJun 11, 2016

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Pinebluff ZIP 28373 using 46.6 PPM nearby hardness and 3 reported measurement benchmarks.

1 match

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile), Total Haloacetic Acids (HAA5) have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Pinebluff

Is tap water safe in Pinebluff?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 46.6 PPM, or 2.7 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.