Hardness
Hard
132 PPM · 7.7 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Sampson County.
At a glance
EPA quarter 2026Q2
Hardness
Hard
132 PPM · 7.7 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 1,637 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
132 PPM
Parts per million
132
mg/L as CaCO₃ equivalent
Grains per gallon
7.7
1 GPG ≈ 17.1 PPM
What this means at home
At 132 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
109
Nearest site
6.2 mi
Observation range
Aug 2, 2016–Aug 28, 2024
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: SA-144 IN ROSEBORO, NC (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Salemburg median
132 PPM
About the same1 indexed ZIP readings · Range 132–132 PPM
North Carolina median
41 PPM
91 PPM higher519 indexed ZIP readings · Range 4.7–267.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2028
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| TTHM | NC0382025 | Resolved | Jan 1, 2025through Mar 31, 2025 |
| Total Haloacetic Acids (HAA5) | NC0382025 | Resolved | Jan 1, 2025through Mar 31, 2025 |
| Public Notice | NC0382025 | Resolved | Sep 22, 2021through Jun 7, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Salemburg ZIP 28385 using 132 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
132 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 132 PPM, or 7.7 grains per gallon, classified as hard. This is not a household tap measurement.
At 132 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.