Hardness
Moderately Hard
60.1 PPM · 3.5 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Northampton County.
At a glance
EPA quarter 2026Q2
Hardness
Moderately Hard
60.1 PPM · 3.5 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 881 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
60.1 PPM
Parts per million
60.1
mg/L as CaCO₃ equivalent
Grains per gallon
3.5
1 GPG ≈ 17.1 PPM
What this means at home
At 60.1 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
97
Nearest site
12.7 mi
Observation range
Jan 29, 2016–Aug 12, 2025
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: HA-170 E 25L3 NEAR TILLERY, NC (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Seaboard median
60 PPM
About the same1 indexed ZIP readings · Range 60.1–60.1 PPM
North Carolina median
41 PPM
19 PPM higher519 indexed ZIP readings · Range 4.7–267.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2025
Copper (CU90)
1.557 mg/L
Reported Dec 31, 2010
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
Measured in mg/L
Local 1.557
EPA limit 1.3
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Public Notice | NC0466035 | Resolved | Jan 30, 2021through Jan 4, 2021 |
| Lead and Copper Rule | NC0466035 | Addressed | Oct 1, 2015 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Seaboard ZIP 27876 using 60.1 PPM nearby hardness and 2 reported measurement benchmarks.
Drinking water protection
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 60.1 PPM, or 3.5 grains per gallon, classified as moderately hard. This is not a household tap measurement.
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.