Skip to content

Local water dashboard

Official source aggregation

Water quality in Washington, NC 27889

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Beaufort County.

No active health-based violation reported
Primary matched system
Beaufort Co Northside Regional Water
Source water
Groundwater
County
Beaufort County
Profile updated

At a glance

What the current records say

Hardness

Hard

141 PPM · 8.2 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

2 systems

Serves 22,405 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

141 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

141

mg/L as CaCO₃ equivalent

Grains per gallon

8.2

1 GPG ≈ 17.1 PPM

What this means at home

At 141 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

55

Nearest site

5.3 mi

Observation range

Jan 30, 2016–Sep 11, 2024

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: BO-464 CITY OF WASHINGTON-6 (Well).USGS source documentation ↗

Regional context

Is 27889 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Washington median

141 PPM

About the same

1 indexed ZIP readings · Range 141–141 PPM

North Carolina median

41 PPM

100 PPM higher

519 indexed ZIP readings · Range 4.7–267.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
2
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
LEAD AND COPPER RULE REVISIONSNC0407010ResolvedOct 17, 2024through Dec 16, 2024
LEAD AND COPPER RULE REVISIONSHealth-basedNC0407010ResolvedOct 17, 2024through Dec 16, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Washington ZIP 27889 using 141 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

141 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Washington

Is tap water safe in Washington?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 141 PPM, or 8.2 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 141 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.