Skip to content

Local water dashboard

Official source aggregation

Water quality in Wilson, NC 27896

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wilson County.

No active health-based violation reported
Primary matched system
Wilson, City Of
Source water
Surface water + Groundwater
County
Wilson County
Profile updated

At a glance

What the current records say

Hardness

Soft

39.8 PPM · 2.3 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

5 systems

Serves 50,332 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

39.8 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

39.8

mg/L as CaCO₃ equivalent

Grains per gallon

2.3

1 GPG ≈ 17.1 PPM

What this means at home

At 39.8 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

54

Nearest site

33.4 mi

Observation range

Jan 14, 2016–Jun 9, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: CONTENTNEA CREEK AT HOOKERTON, NC (Stream).USGS source documentation ↗

Regional context

Is 27896 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Wilson median

40 PPM

About the same

2 indexed ZIP readings · Range 39.8–40.2 PPM

North Carolina median

41 PPM

About the same

519 indexed ZIP readings · Range 4.7–267.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
22
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Chlorine dioxideNC4098019ResolvedMar 1, 2026through Mar 31, 2026
Chlorine dioxideNC4098019ResolvedFeb 1, 2026through Feb 28, 2026
TTHMNC4098019ArchivedJan 1, 2026through Mar 31, 2026
Total Haloacetic Acids (HAA5)NC4098019ArchivedJan 1, 2026through Mar 31, 2026
ChloriteNC4098019ResolvedJun 1, 2025through Jun 30, 2025
ChloriteNC4098019ResolvedMay 1, 2025through May 31, 2025
ChloriteNC4098019ResolvedFeb 1, 2025through Feb 28, 2025
TTHMNC4098012ArchivedJan 1, 2025through Dec 31, 2025
Total Haloacetic Acids (HAA5)NC4098012ArchivedJan 1, 2025through Dec 31, 2025
TTHMNC4098014ArchivedJan 1, 2025through Dec 31, 2025
Total Haloacetic Acids (HAA5)NC4098014ArchivedJan 1, 2025through Dec 31, 2025
ChloriteNC4098019ResolvedJan 1, 2025through Jan 31, 2025
LEAD AND COPPER RULE REVISIONSNC4098019ResolvedOct 17, 2024through Dec 17, 2024
LEAD AND COPPER RULE REVISIONSHealth-basedNC4098019ResolvedOct 17, 2024through Dec 17, 2024
TTHMNC4098019ResolvedJul 1, 2024through Sep 30, 2024
Total Haloacetic Acids (HAA5)NC4098019ResolvedJul 1, 2024through Sep 30, 2024
Lead and Copper RuleNC4098012ResolvedJan 1, 2024through Feb 13, 2024
ChlorineNC4098019ResolvedOct 1, 2023through Dec 31, 2023
Consumer Confidence RuleNC4098014ResolvedJul 1, 2023through Dec 13, 2023
Lead and Copper RuleNC4098019ResolvedJan 1, 2023through Mar 9, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Wilson ZIP 27896 using 39.8 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Wilson

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Wilson reports →

Frequently asked

Water questions for Wilson

Is tap water safe in Wilson?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 39.8 PPM, or 2.3 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.