Skip to content

Local water dashboard

Official source aggregation

Water quality in Ellendale, ND 58436

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Dickey County.

2 reported benchmark flags
Primary matched system
Ellendale City Of
Source water
Groundwater
County
Dickey County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

372 PPM · 21.8 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0019 mg/L

13% of action level

Utility match

1 system

Serves 1,394 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

372 PPM

Soft
0–59Moderate
60–120Hard
121–180Very hard
181+

Parts per million

372

mg/L as CaCO₃ equivalent

Grains per gallon

21.8

1 GPG ≈ 17.1 PPM

What this means at home

At 372 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

17

Nearest site

24.2 mi

Observation range

May 18, 2016–May 1, 2024

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 134-064-22BBB2 (Well).USGS source documentation ↗

Regional context

Is 58436 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Ellendale median

372 PPM

About the same

1 indexed ZIP readings · Range 372–372 PPM

North Dakota median

372 PPM

About the same

226 indexed ZIP readings · Range 170.5–716 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass2 fail

Lead (PB90)

0.0019 mg/L

Reported Dec 31, 2023

Copper (CU90)

1.89 mg/L

Reported Feb 25, 1994

Numerical coverage

3 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0019

EPA limit 0.015

Local level is 13% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.89

EPA limit 1.3

Local level is 145% of the listed EPA limit.

TTHM

Measured in MG/L

Fail

Local 0.113

EPA limit 0.08

Local level is 141% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
1
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
TTHMHealth-basedReported 0.113 MG/L · MCL 0.08ND1100306ResolvedOct 1, 2023through Dec 31, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Ellendale ZIP 58436 using 372 PPM nearby hardness and 3 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

372 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile), TTHM have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Ellendale

Is tap water safe in Ellendale?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 372 PPM, or 21.8 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 372 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.