Hardness
Very Hard
288 PPM · 16.8 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Burleigh County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
288 PPM · 16.8 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.039 mg/L
260% of action level
Utility match
1 system
Serves 152 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
288 PPM
Parts per million
288
mg/L as CaCO₃ equivalent
Grains per gallon
16.8
1 GPG ≈ 17.1 PPM
What this means at home
At 288 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
23
Nearest site
27.9 mi
Observation range
May 18, 2016–May 13, 2024
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 139-73-17CDA1 (Steele well 5) (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Wing median
288 PPM
About the same1 indexed ZIP readings · Range 288–288 PPM
North Dakota median
372 PPM
84 PPM lower226 indexed ZIP readings · Range 170.5–716 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.039 mg/L
Reported Dec 31, 2026
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.039
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Revised Total Coliform Rule | ND0801036 | Resolved | Nov 1, 2023through Nov 30, 2023 |
| Chlorine | ND0801036 | Resolved | Oct 1, 2023through Dec 31, 2023 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Wing ZIP 58494 using 288 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
288 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Lead (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 288 PPM, or 16.8 grains per gallon, classified as very hard. This is not a household tap measurement.
At 288 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.