Hardness
Very Hard
194 PPM · 11.3 GPG
Local water dashboard
Official source aggregationWater quality in Brady, NE 69123
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Lincoln County.
No active health-based violation reported
- Primary matched system
- Brady, Village Of
- Source water
- Groundwater
- County
- Lincoln County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
9.5e-4 mg/L
6% of action level
Utility match
1 system
Serves 383 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
194 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
194
mg/L as CaCO₃ equivalent
Grains per gallon
11.3
1 GPG ≈ 17.1 PPM
What this means at home
At 194 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
24
Nearest site
26 mi
Observation range
Aug 12, 2019–Jul 11, 2023
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 16N 24W18A1 SLoup Spr 29 (Spring).USGS source documentation ↗
Regional context
Is 69123 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Brady median
194 PPM
About the same1 indexed ZIP readings · Range 194–194 PPM
Nebraska median
309 PPM
115 PPM lower466 indexed ZIP readings · Range 72.3–1245 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
9.5e-4 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 9.5e-4
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 0
- Health-based
- 0
- Active health-based
- 0
No violation record was returned for the associated systems in the imported lookback window beginning Jan 1, 2021.
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Brady ZIP 69123 using 194 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
194 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Brady
Is tap water safe in Brady?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 194 PPM, or 11.3 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 194 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.