Hardness
Very Hard
363 PPM · 21.2 GPG
Local water dashboard
Official source aggregationWater quality in Creston, NE 68631
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Platte County.
1 reported benchmark flag
- Primary matched system
- Creston, Village Of
- Source water
- Groundwater
- County
- Platte County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0011 mg/L
7% of action level
Utility match
1 system
Serves 210 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
363 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
363
mg/L as CaCO₃ equivalent
Grains per gallon
21.2
1 GPG ≈ 17.1 PPM
What this means at home
At 363 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
153
Nearest site
4.2 mi
Observation range
Aug 10, 2016–May 27, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 20N 1W10BABA1 (Well).USGS source documentation ↗
Regional context
Is 68631 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Creston median
363 PPM
About the same1 indexed ZIP readings · Range 363–363 PPM
Nebraska median
309 PPM
54 PPM higher466 indexed ZIP readings · Range 72.3–1245 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0.0011 mg/L
Reported Dec 31, 2021
Copper (CU90)
1.58 mg/L
Reported Dec 31, 1993
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0011
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 1.58
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 4
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | NE3114114 | Unaddressed | Jul 1, 2025 |
| LEAD AND COPPER RULE REVISIONS | NE3114114 | Unaddressed | Oct 17, 2024 |
| Lead and Copper Rule | NE3114114 | Resolved | Oct 1, 2024through Feb 1, 2025 |
| Revised Total Coliform Rule | NE3114114 | Resolved | Apr 1, 2022through Apr 30, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Creston ZIP 68631 using 363 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
363 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Creston
Is tap water safe in Creston?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 363 PPM, or 21.2 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 363 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.