Skip to content

Local water dashboard

Official source aggregation

Water quality in Fullerton, NE 68638

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Nance County.

2 reported benchmark flags
Primary matched system
Fullerton, City Of
Source water
Groundwater
County
Nance County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

347.5 PPM · 20.3 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0014 mg/L

10% of action level

Utility match

1 system

Serves 1,307 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

347.5 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

347.5

mg/L as CaCO₃ equivalent

Grains per gallon

20.3

1 GPG ≈ 17.1 PPM

What this means at home

At 347.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

90

Nearest site

7.7 mi

Observation range

Aug 24, 2016–May 19, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 16N 5W11DCBB1 C-1 Deep (Well).USGS source documentation ↗

Regional context

Is 68638 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Fullerton median

348 PPM

About the same

1 indexed ZIP readings · Range 347.5–347.5 PPM

Nebraska median

309 PPM

39 PPM higher

466 indexed ZIP readings · Range 72.3–1245 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass2 fail

Lead (PB90)

0.0014 mg/L

Reported Dec 31, 2027

Copper (CU90)

1.97 mg/L

Reported Dec 31, 1993

Numerical coverage

3 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0014

EPA limit 0.015

Local level is 10% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.97

EPA limit 1.3

Local level is 152% of the listed EPA limit.

Selenium

Measured in MG/L

Fail

Local 51

EPA limit 0.05

Local level is 102000% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
4
Health-based
3
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleHealth-basedNE3112503ResolvedSep 1, 2025through Sep 23, 2025
Revised Total Coliform RuleHealth-basedNE3112503ResolvedOct 1, 2024through Oct 29, 2024
Revised Total Coliform RuleNE3112503ResolvedNov 1, 2022through Nov 30, 2022
SeleniumHealth-basedReported 51 MG/L · MCL 0.05NE3112503ResolvedApr 1, 2021through Jun 30, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Fullerton ZIP 68638 using 347.5 PPM nearby hardness and 3 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

347.5 PPM is 3× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile), Selenium have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Fullerton

Is tap water safe in Fullerton?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 347.5 PPM, or 20.3 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 347.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.