Hardness
Very Hard
391 PPM · 22.9 GPG
Local water dashboard
Official source aggregationWater quality in Pierce, NE 68767
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Pierce County.
No active health-based violation reported
- Primary matched system
- Pierce, City Of
- Source water
- Groundwater
- County
- Pierce County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0023 mg/L
15% of action level
Utility match
1 system
Serves 1,800 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
391 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
391
mg/L as CaCO₃ equivalent
Grains per gallon
22.9
1 GPG ≈ 17.1 PPM
What this means at home
At 391 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
93
Nearest site
5 mi
Observation range
Aug 9, 2016–May 27, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 26 2W 5BAAB1 10S P-33 (Well).USGS source documentation ↗
Regional context
Is 68767 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Pierce median
391 PPM
About the same1 indexed ZIP readings · Range 391–391 PPM
Nebraska median
309 PPM
82 PPM higher466 indexed ZIP readings · Range 72.3–1245 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0.0023 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0023
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 1
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Lead and Copper Rule | NE3113904 | Resolved | Jan 1, 2023through Feb 16, 2024 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Pierce ZIP 68767 using 391 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
391 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Pierce
Is tap water safe in Pierce?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 391 PPM, or 22.9 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 391 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.