Skip to content

Local water dashboard

Official source aggregation

Water quality in Marlborough, NH 03455

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Cheshire County.

1 reported benchmark flag
Primary matched system
Marlborough Water Works
Source water
Groundwater
County
Cheshire County
Profile updated

At a glance

What the current records say

Hardness

Moderately Hard

96.3 PPM · 5.6 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

Not reported

Check the utility CCR or tap test

Utility match

2 systems

Serves 750 people system-wide

Hardness meter

How hard is the water?

Moderately Hard

Estimated local hardness

USGS hardness classification scale

96.3 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

96.3

mg/L as CaCO₃ equivalent

Grains per gallon

5.6

1 GPG ≈ 17.1 PPM

What this means at home

At 96.3 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

124

Nearest site

11.5 mi

Observation range

Jan 13, 2016–Sep 25, 2023

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: NH-PCW 126 (Well).USGS source documentation ↗

Regional context

Is 03455 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Marlborough median

96 PPM

About the same

1 indexed ZIP readings · Range 96.3–96.3 PPM

New Hampshire median

58 PPM

38 PPM higher

90 indexed ZIP readings · Range 16–102 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

0 pass1 fail

Lead (PB90)

Not available

No numerical 90th-percentile result

Copper (CU90)

2.52 mg/L

Reported Dec 31, 1993

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Copper (90th percentile)

Measured in mg/L

Fail

Local 2.52

EPA limit 1.3

Local level is 194% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
2
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
TTHMNH1482010ResolvedJul 1, 2025through Oct 1, 2025
Total Haloacetic Acids (HAA5)NH1482010ResolvedJul 1, 2025through Oct 1, 2025

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Marlborough ZIP 03455 using 96.3 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Marlborough

Is tap water safe in Marlborough?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 96.3 PPM, or 5.6 grains per gallon, classified as moderately hard. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.