Skip to content

Local water dashboard

Official source aggregation

Water quality in Hoboken, NJ 07086

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Hudson County.

No active health-based violation reported
Primary matched system
Hoboken Water Utility
Source water
Surface water
County
Hudson County
Profile updated

At a glance

What the current records say

Hardness

Moderately Hard

81.8 PPM · 4.8 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.004 mg/L

26% of action level

Utility match

1 system

Serves 52,000 people system-wide

Hardness meter

How hard is the water?

Moderately Hard

Estimated local hardness

USGS hardness classification scale

81.8 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

81.8

mg/L as CaCO₃ equivalent

Grains per gallon

4.8

1 GPG ≈ 17.1 PPM

What this means at home

At 81.8 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

265

Nearest site

9.1 mi

Observation range

Jan 4, 2016–Jun 9, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Saddle River at Lodi NJ (Stream).USGS source documentation ↗

Regional context

Is 07086 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Hoboken median

82 PPM

About the same

2 indexed ZIP readings · Range 81.5–81.8 PPM

New Jersey median

81 PPM

About the same

84 indexed ZIP readings · Range 47–121.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.004 mg/L

Reported Dec 31, 2026

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.004

EPA limit 0.015

Local level is 26% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
1
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Consumer Confidence RuleNJ0905001ResolvedJul 1, 2021through Aug 13, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Hoboken ZIP 07086 using 81.8 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Hoboken

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Hoboken reports →

Frequently asked

Water questions for Hoboken

Is tap water safe in Hoboken?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 81.8 PPM, or 4.8 grains per gallon, classified as moderately hard. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.