Hardness
Very Hard
380 PPM · 22.2 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Luna County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
380 PPM · 22.2 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 2,230 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
380 PPM
Parts per million
380
mg/L as CaCO₃ equivalent
Grains per gallon
22.2
1 GPG ≈ 17.1 PPM
What this means at home
At 380 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
57
Nearest site
53.2 mi
Observation range
Apr 4, 2016–Sep 13, 2022
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MBOWN-N7 25S.01E.21.342 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Columbus median
380 PPM
About the same1 indexed ZIP readings · Range 380–380 PPM
New Mexico median
228 PPM
152 PPM higher194 indexed ZIP readings · Range 74.2–688.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2018
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | NM3523016 | Resolved | Oct 1, 2025through Feb 11, 2026 |
| Public Notice | NM3523016 | Resolved | Jul 23, 2025through Dec 9, 2025 |
| Public Notice | NM3523016 | Resolved | Aug 11, 2023through Sep 29, 2023 |
| Groundwater RuleHealth-based | NM3523016 | Resolved | Jun 3, 2023through Jun 28, 2023 |
| Groundwater RuleHealth-based | NM3523016 | Resolved | Jun 3, 2023through Jun 16, 2023 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Columbus ZIP 88029 using 380 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
380 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 380 PPM, or 22.2 grains per gallon, classified as very hard. This is not a household tap measurement.
At 380 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.