Hardness
Very Hard
198 PPM · 11.6 GPG
Local water dashboard
Official source aggregationWater quality in Logan, NM 88426
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Harding County.
No active health-based violation reported
- Primary matched system
- Logan Water System
- Source water
- Groundwater
- County
- Harding County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.002 mg/L
13% of action level
Utility match
1 system
Serves 2,321 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
198 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
198
mg/L as CaCO₃ equivalent
Grains per gallon
11.6
1 GPG ≈ 17.1 PPM
What this means at home
At 198 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
14
Nearest site
48.7 mi
Observation range
Jun 20, 2016–May 13, 2021
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 07N.34E.23.112 1 (Well).USGS source documentation ↗
Regional context
Is 88426 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Logan median
198 PPM
About the same1 indexed ZIP readings · Range 198–198 PPM
New Mexico median
228 PPM
30 PPM lower194 indexed ZIP readings · Range 74.2–688.5 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0.002 mg/L
Reported Dec 31, 2014
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.002
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 1
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| E. COLI | NM3526920 | Resolved | Nov 24, 2022through Dec 6, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Logan ZIP 88426 using 198 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
198 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Logan
Is tap water safe in Logan?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 198 PPM, or 11.6 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 198 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.