Skip to content

Local water dashboard

Official source aggregation

Water quality in Beatty, NV 89003

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Nye County.

No active health-based violation reported
Primary matched system
Beatty Water And Sanitation District
Source water
Groundwater
County
Nye County
Profile updated

At a glance

What the current records say

Hardness

Hard

121 PPM · 7.1 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0014 mg/L

9% of action level

Utility match

1 system

Serves 1,024 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

121 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

121

mg/L as CaCO₃ equivalent

Grains per gallon

7.1

1 GPG ≈ 17.1 PPM

What this means at home

At 121 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

21

Nearest site

27.5 mi

Observation range

Jan 30, 2017–Sep 22, 2025

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 146 S08 E43 26BC 2 BC- 2 (Well).USGS source documentation ↗

Regional context

Is 89003 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Beatty median

121 PPM

About the same

1 indexed ZIP readings · Range 121–121 PPM

Nevada median

227 PPM

106 PPM lower

98 indexed ZIP readings · Range 9.6–335 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0014 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0014

EPA limit 0.015

Local level is 9% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
22
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Consumer Confidence RuleNV0000009ResolvedOct 1, 2023through Jan 30, 2024
1,2,4-TrichlorobenzeneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
cis-1,2-DichloroethyleneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
Xylenes, TotalNV0000009ArchivedJan 1, 2023through Dec 31, 2025
p-DichlorobenzeneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
Vinyl chlorideNV0000009ArchivedJan 1, 2023through Dec 31, 2025
1,2-DichloroethaneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
1,1,1-TrichloroethaneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
1,2-DichloropropaneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
TrichloroethyleneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
1,1,2-TrichloroethaneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
TetrachloroethyleneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
CHLOROBENZENENV0000009ArchivedJan 1, 2023through Dec 31, 2025
BenzeneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
EthylbenzeneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
StyreneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
1,1-DichloroethyleneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
TolueneNV0000009ArchivedJan 1, 2023through Dec 31, 2025
DICHLOROMETHANENV0000009ArchivedJan 1, 2023through Dec 31, 2025
Carbon tetrachlorideNV0000009ArchivedJan 1, 2023through Dec 31, 2025

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Beatty ZIP 89003 using 121 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

121 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Beatty

Is tap water safe in Beatty?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 121 PPM, or 7.1 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 121 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.