Skip to content

Local water dashboard

Official source aggregation

Water quality in Carson, NV 89701

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Carson City County.

No active health-based violation reported
Primary matched system
Carson City Public Works
Source water
Surface water
County
Carson City County
Profile updated

At a glance

What the current records say

Hardness

Moderately Hard

108 PPM · 6.3 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0027 mg/L

18% of action level

Utility match

1 system

Serves 59,000 people system-wide

Hardness meter

How hard is the water?

Moderately Hard

Estimated local hardness

USGS hardness classification scale

108 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

108

mg/L as CaCO₃ equivalent

Grains per gallon

6.3

1 GPG ≈ 17.1 PPM

What this means at home

At 108 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

29

Nearest site

2.9 mi

Observation range

Jan 5, 2016–Apr 14, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: CLEAR CK AT FUJI PK AT CARSON CITY, NV (Stream).USGS source documentation ↗

Regional context

Is 89701 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Carson median

108 PPM

About the same

3 indexed ZIP readings · Range 77.2–126 PPM

Nevada median

227 PPM

119 PPM lower

98 indexed ZIP readings · Range 9.6–335 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0027 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0027

EPA limit 0.015

Local level is 18% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
1
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
NitrateNV0000015ResolvedJan 1, 2022through Dec 31, 2022

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Carson ZIP 89701 using 108 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Nearby indexed reports

Compare ZIPs in Carson

Estimates can differ across a city because monitoring locations and associated systems differ.

View all Carson reports →

Frequently asked

Water questions for Carson

Is tap water safe in Carson?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 108 PPM, or 6.3 grains per gallon, classified as moderately hard. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.