Hardness
Very Hard
222.5 PPM · 13 GPG
Local water dashboard
Official source aggregationWater quality in Pioche, NV 89043
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Lincoln County.
1 reported benchmark flag
- Primary matched system
- Pioche Public Utilities
- Source water
- Groundwater
- County
- Lincoln County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.004 mg/L
27% of action level
Utility match
1 system
Serves 700 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
222.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
222.5
mg/L as CaCO₃ equivalent
Grains per gallon
13
1 GPG ≈ 17.1 PPM
What this means at home
At 222.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
48
Nearest site
34.8 mi
Observation range
Jun 27, 2016–Nov 15, 2023
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 207 N07 E62 33BCCB1 Flag Spring 2 (Spring).USGS source documentation ↗
Regional context
Is 89043 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Pioche median
223 PPM
About the same1 indexed ZIP readings · Range 222.5–222.5 PPM
Nevada median
227 PPM
About the same98 indexed ZIP readings · Range 9.6–335 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0.004 mg/L
Reported Dec 31, 2033
Copper (CU90)
2.4 mg/L
Reported Dec 31, 2022
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.004
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 2.4
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 47
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | NV0000186 | Unaddressed | Jul 1, 2025 |
| 1,2,4-Trichlorobenzene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Xylenes, Total | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| o-Dichlorobenzene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| 1,2-Dichloroethane | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| 1,1,1-Trichloroethane | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Carbon tetrachloride | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| 1,2-Dichloropropane | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| 1,1,2-Trichloroethane | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Toluene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Ethylbenzene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Styrene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| 1,2,4-Trichlorobenzene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Xylenes, Total | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| DICHLOROMETHANE | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| p-Dichlorobenzene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| 1,1-Dichloroethylene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| 1,1,1-Trichloroethane | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Carbon tetrachloride | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
| Trichloroethylene | NV0000186 | Archived | Jan 1, 2023through Dec 31, 2025 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Pioche ZIP 89043 using 222.5 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
222.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Pioche
Is tap water safe in Pioche?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 222.5 PPM, or 13 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 222.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.