Hardness
Moderately Hard
84.2 PPM · 4.9 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Westchester County.
At a glance
EPA quarter 2026Q2
Hardness
Moderately Hard
84.2 PPM · 4.9 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0035 mg/L
23% of action level
Utility match
1 system
Serves 11,000 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
84.2 PPM
Parts per million
84.2
mg/L as CaCO₃ equivalent
Grains per gallon
4.9
1 GPG ≈ 17.1 PPM
What this means at home
At 84.2 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
229
Nearest site
7 mi
Observation range
Jan 4, 2016–Jun 9, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Sparkill Brook tributary at Rockleigh NJ (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Tarrytown median
84 PPM
About the same1 indexed ZIP readings · Range 84.2–84.2 PPM
New York median
120 PPM
36 PPM lower132 indexed ZIP readings · Range 7.2–290 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0035 mg/L
Reported Dec 31, 2027
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0035
EPA limit 0.015
Measured in MG/L
Local 0.062
EPA limit 0.06
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | NY5903461 | Resolved | Oct 17, 2024through Dec 20, 2024 |
| Total Haloacetic Acids (HAA5)Health-basedReported 0.062 MG/L · MCL 0.06 | NY5903461 | Resolved | Jan 1, 2022through Mar 31, 2022 |
| Revised Total Coliform Rule | NY5903461 | Resolved | Nov 1, 2021through Nov 30, 2021 |
| Total Haloacetic Acids (HAA5)Health-basedReported 0.0647 MG/L · MCL 0.06 | NY5903461 | Resolved | Oct 1, 2021through Dec 31, 2021 |
| Total Haloacetic Acids (HAA5)Health-basedReported 0.0621 MG/L · MCL 0.06 | NY5903461 | Resolved | Oct 1, 2021through Dec 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Tarrytown ZIP 10591 using 84.2 PPM nearby hardness and 2 reported measurement benchmarks.
Drinking water protection
Total Haloacetic Acids (HAA5) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 84.2 PPM, or 4.9 grains per gallon, classified as moderately hard. This is not a household tap measurement.
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.