Skip to content

Local water dashboard

Official source aggregation

Water quality in Shattuck, OK 73858

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Ellis County.

No active health-based violation reported
Primary matched system
Shattuck
Source water
Groundwater
County
Ellis County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

216 PPM · 12.6 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 1,200 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

216 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

216

mg/L as CaCO₃ equivalent

Grains per gallon

12.6

1 GPG ≈ 17.1 PPM

What this means at home

At 216 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

19

Nearest site

13.3 mi

Observation range

Jun 13, 2016–May 11, 2021

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: SH-04-48-401 (Well).USGS source documentation ↗

Regional context

Is 73858 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Shattuck median

216 PPM

About the same

1 indexed ZIP readings · Range 216–216 PPM

Oklahoma median

226 PPM

10 PPM lower

148 indexed ZIP readings · Range 7–610 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
18
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
ChlorineOK2002304ResolvedDec 1, 2025through Dec 31, 2025
LEAD AND COPPER RULE REVISIONSHealth-basedOK2002304ResolvedOct 17, 2024through Jan 28, 2026
LEAD AND COPPER RULE REVISIONSOK2002304ResolvedOct 17, 2024through Jan 28, 2026
BHC-GAMMAOK2002304ResolvedOct 1, 2024through Dec 31, 2024
SimazineOK2002304ResolvedOct 1, 2024through Dec 31, 2024
SimazineOK2002304ResolvedJul 1, 2024through Sep 30, 2024
GlyphosateOK2002304ResolvedApr 1, 2024through Jun 30, 2024
SimazineOK2002304ResolvedApr 1, 2024through Jun 30, 2024
2,4-DOK2002304ResolvedApr 1, 2024through Jun 30, 2024
DalaponOK2002304ResolvedApr 1, 2024through Jun 30, 2024
ChlorineOK2002304ResolvedJan 1, 2024through Mar 31, 2024
Revised Total Coliform RuleOK2002304ResolvedJan 1, 2024through Jan 31, 2024
Total Haloacetic Acids (HAA5)OK2002304ResolvedJan 1, 2024through Dec 31, 2024
TTHMOK2002304ResolvedJan 1, 2024through Dec 31, 2024
SimazineOK2002304ResolvedJul 1, 2023through Sep 30, 2023
BHC-GAMMAOK2002304ResolvedApr 1, 2022through Jun 30, 2022
SimazineOK2002304ResolvedJan 1, 2022through Mar 31, 2022
SimazineOK2002304ResolvedJan 1, 2022through Mar 31, 2022

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Shattuck ZIP 73858 using 216 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

216 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Shattuck

Is tap water safe in Shattuck?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 216 PPM, or 12.6 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 216 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.