Hardness
Hard
129.5 PPM · 7.6 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wagoner County.
At a glance
EPA quarter 2026Q2
Hardness
Hard
129.5 PPM · 7.6 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0027 mg/L
18% of action level
Utility match
1 system
Serves 7,982 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
129.5 PPM
Parts per million
129.5
mg/L as CaCO₃ equivalent
Grains per gallon
7.6
1 GPG ≈ 17.1 PPM
What this means at home
At 129.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
16
Nearest site
49 mi
Observation range
Jan 26, 2016–Apr 20, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Illinois River South of Siloam Springs, AR (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Wagoner median
130 PPM
About the same1 indexed ZIP readings · Range 129.5–129.5 PPM
Oklahoma median
226 PPM
96 PPM lower148 indexed ZIP readings · Range 7–610 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0027 mg/L
Reported Jun 30, 2026
Copper (CU90)
1.73 mg/L
Reported Dec 31, 2025
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0027
EPA limit 0.015
Measured in mg/L
Local 1.73
EPA limit 1.3
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Total Haloacetic Acids (HAA5) | OK1021649 | Unaddressed | Dec 30, 2025 |
| Lead and Copper Rule | OK1021649 | Unaddressed | Jul 1, 2025 |
| LEAD AND COPPER RULE REVISIONS | OK1021649 | Resolved | Oct 17, 2024through Mar 24, 2026 |
| LEAD AND COPPER RULE REVISIONSHealth-based | OK1021649 | Resolved | Oct 17, 2024through Mar 24, 2026 |
| Lead and Copper Rule | OK1021649 | Resolved | Oct 1, 2024through Jul 11, 2025 |
| Nitrate-Nitrite | OK1021649 | Resolved | Jan 1, 2021through Dec 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Wagoner ZIP 74467 using 129.5 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
129.5 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 129.5 PPM, or 7.6 grains per gallon, classified as hard. This is not a household tap measurement.
At 129.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.