Skip to content

Local water dashboard

Official source aggregation

Water quality in Summit Hill, PA 18250

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Carbon County.

1 reported benchmark flag
Primary matched system
Summit Hill Water Authority
Source water
Groundwater
County
Carbon County
Profile updated

At a glance

What the current records say

Hardness

Hard

129 PPM · 7.5 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.013 mg/L

87% of action level

Utility match

1 system

Serves 2,890 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

129 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

129

mg/L as CaCO₃ equivalent

Grains per gallon

7.5

1 GPG ≈ 17.1 PPM

What this means at home

At 129 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

237

Nearest site

3.1 mi

Observation range

Mar 30, 2016–Jun 10, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: SC 642 (Well).USGS source documentation ↗

Regional context

Is 18250 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Summit Hill median

129 PPM

About the same

1 indexed ZIP readings · Range 129–129 PPM

Pennsylvania median

84 PPM

45 PPM higher

139 indexed ZIP readings · Range 43–166.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0.013 mg/L

Reported Dec 31, 1993

Copper (CU90)

3.21 mg/L

Reported Dec 31, 1997

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.013

EPA limit 0.015

Local level is 87% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 3.21

EPA limit 1.3

Local level is 247% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
7
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
ChlorinePA3130013ArchivedNov 1, 2025through Nov 30, 2025
Groundwater RulePA3130013ArchivedNov 1, 2025through Nov 30, 2025
Public NoticePA3130013ResolvedDec 13, 2023through Apr 4, 2024
Groundwater RuleHealth-basedPA3130013ResolvedDec 1, 2023through Dec 31, 2023
Consumer Confidence RulePA3130013ResolvedOct 1, 2022through Nov 21, 2022
Groundwater RulePA3130013ResolvedFeb 1, 2022through Feb 28, 2022
Groundwater RulePA3130013ResolvedSep 1, 2021through Sep 30, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Summit Hill ZIP 18250 using 129 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

129 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Summit Hill

Is tap water safe in Summit Hill?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 129 PPM, or 7.5 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 129 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.