Hardness
Soft
12.1 PPM · 0.7 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Mccormick County.
At a glance
EPA quarter 2026Q2
Hardness
Soft
12.1 PPM · 0.7 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
2 systems
Serves 8,500 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
12.1 PPM
Parts per million
12.1
mg/L as CaCO₃ equivalent
Grains per gallon
0.7
1 GPG ≈ 17.1 PPM
What this means at home
At 12.1 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
8
Nearest site
34.9 mi
Observation range
Jan 7, 2016–Dec 9, 2024
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: TRIB TO MCCOYS CREEK AT FORT GORDON, GA (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Mccormick median
12 PPM
About the same1 indexed ZIP readings · Range 12.1–12.1 PPM
South Carolina median
19 PPM
7 PPM lower236 indexed ZIP readings · Range 4.2–106 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
Measured in MG/L
Local 0.082
EPA limit 0.08
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| TTHMHealth-basedReported 0.082 MG/L · MCL 0.08 | SC3520002 | Resolved | Jan 1, 2023through Mar 31, 2023 |
| TTHMHealth-basedReported 0.097 MG/L · MCL 0.08 | SC3520002 | Resolved | Oct 1, 2022through Dec 31, 2022 |
| TTHMHealth-basedReported 0.085 MG/L · MCL 0.08 | SC3510001 | Resolved | Oct 1, 2022through Dec 31, 2022 |
| CARBON, TOTAL | SC3510001 | Resolved | Oct 1, 2022through Dec 1, 2022 |
| TTHMHealth-basedReported 0.115 MG/L · MCL 0.08 | SC3520002 | Resolved | Jul 1, 2022through Sep 30, 2022 |
| TTHMHealth-basedReported 0.084 MG/L · MCL 0.08 | SC3510001 | Resolved | Jul 1, 2022through Sep 30, 2022 |
| Consumer Confidence Rule | SC3510001 | Resolved | Jul 1, 2022through Jul 31, 2022 |
| TTHMHealth-basedReported 0.111 MG/L · MCL 0.08 | SC3520002 | Resolved | Apr 1, 2022through Jun 30, 2022 |
| TTHMHealth-basedReported 0.084 MG/L · MCL 0.08 | SC3510001 | Resolved | Apr 1, 2022through Jun 30, 2022 |
| TTHMHealth-basedReported 0.099 MG/L · MCL 0.08 | SC3520002 | Resolved | Jan 1, 2022through Mar 31, 2022 |
| TTHM | SC3520002 | Addressed | Aug 13, 2014 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Mccormick ZIP 29899 using 12.1 PPM nearby hardness and 2 reported measurement benchmarks.
Drinking water protection
TTHM has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 12.1 PPM, or 0.7 grains per gallon, classified as soft. This is not a household tap measurement.
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.