Skip to content

Local water dashboard

Official source aggregation

Water quality in Baxter, TN 38544

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Putnam County.

No active health-based violation reported
Primary matched system
Baxter Water Department
Source water
Surface water
County
Putnam County
Profile updated

At a glance

What the current records say

Hardness

Hard

133 PPM · 7.8 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.001 mg/L

7% of action level

Utility match

1 system

Serves 7,781 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

133 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

133

mg/L as CaCO₃ equivalent

Grains per gallon

7.8

1 GPG ≈ 17.1 PPM

What this means at home

At 133 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

39

Nearest site

17.3 mi

Observation range

Mar 31, 2022–Apr 6, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Dk:J-033 (Well).USGS source documentation ↗

Regional context

Is 38544 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Baxter median

133 PPM

About the same

1 indexed ZIP readings · Range 133–133 PPM

Tennessee median

50 PPM

83 PPM higher

323 indexed ZIP readings · Range 4.5–247 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.001 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.001

EPA limit 0.015

Local level is 7% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
5
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Revised Total Coliform RuleTN0000040ResolvedMar 1, 2025through Mar 31, 2025
Revised Total Coliform RuleTN0000040ResolvedFeb 1, 2025through Feb 28, 2025
ChlorineTN0000040ResolvedJan 1, 2025through Mar 31, 2025
Consumer Confidence RuleTN0000040ResolvedJul 1, 2021through Aug 26, 2021
Public NoticeTN0000040UnaddressedJun 25, 2018

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Baxter ZIP 38544 using 133 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

133 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Baxter

Is tap water safe in Baxter?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 133 PPM, or 7.8 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 133 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.