Hardness
Very Hard
247 PPM · 14.4 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Carter County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
247 PPM · 14.4 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0027 mg/L
18% of action level
Utility match
1 system
Serves 4,354 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
247 PPM
Parts per million
247
mg/L as CaCO₃ equivalent
Grains per gallon
14.4
1 GPG ≈ 17.1 PPM
What this means at home
At 247 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
11
Nearest site
2 mi
Observation range
Jul 20, 2022–Apr 22, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: HAMPTON SPRING (Spring).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Hampton median
247 PPM
About the same1 indexed ZIP readings · Range 247–247 PPM
Tennessee median
50 PPM
197 PPM higher323 indexed ZIP readings · Range 4.5–247 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0027 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0027
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | TN0000282 | Resolved | Jul 1, 2024through Jul 18, 2024 |
| Consumer Confidence Rule | TN0000282 | Unaddressed | Jul 1, 2022 |
| Lead and Copper Rule | TN0000282 | Unaddressed | Nov 30, 2018 |
| Long Term 2 Enhanced Surface Water Treatment Rule | TN0000282 | Unaddressed | Jul 1, 2008 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Hampton ZIP 37658 using 247 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
247 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 247 PPM, or 14.4 grains per gallon, classified as very hard. This is not a household tap measurement.
At 247 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.