Hardness
Very Hard
464.5 PPM · 27.2 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Andrews County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
464.5 PPM · 27.2 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 14,109 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
464.5 PPM
Parts per million
464.5
mg/L as CaCO₃ equivalent
Grains per gallon
27.2
1 GPG ≈ 17.1 PPM
What this means at home
At 464.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
38
Nearest site
17.8 mi
Observation range
May 31, 2016–Sep 5, 2024
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: KD-27-27-4xx (QW) (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Andrews median
465 PPM
About the same1 indexed ZIP readings · Range 464.5–464.5 PPM
Texas median
111 PPM
354 PPM higher1019 indexed ZIP readings · Range 5.4–500.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
Measured in MG/L
Local 0.012
EPA limit 0.01
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | TX0020001 | Resolved | Jul 2, 2025through Mar 27, 2026 |
| ArsenicHealth-basedReported 0.012 MG/L · MCL 0.01 | TX0020001 | Resolved | Jan 1, 2024through Mar 31, 2024 |
| ArsenicHealth-basedReported 0.014 MG/L · MCL 0.01 | TX0020001 | Resolved | Oct 1, 2023through Dec 31, 2023 |
| ArsenicHealth-basedReported 0.013 MG/L · MCL 0.01 | TX0020001 | Resolved | Jul 1, 2023through Sep 30, 2023 |
| ArsenicHealth-basedReported 0.015 MG/L · MCL 0.01 | TX0020001 | Resolved | Apr 1, 2023through Jun 30, 2023 |
| ArsenicHealth-basedReported 0.015 MG/L · MCL 0.01 | TX0020001 | Resolved | Jan 1, 2023through Mar 31, 2023 |
| ArsenicHealth-basedReported 0.013 MG/L · MCL 0.01 | TX0020001 | Resolved | Oct 1, 2022through Dec 31, 2022 |
| ArsenicHealth-basedReported 0.012 MG/L · MCL 0.01 | TX0020001 | Resolved | Jul 1, 2022through Sep 30, 2022 |
| ArsenicHealth-basedReported 0.011 MG/L · MCL 0.01 | TX0020001 | Resolved | Apr 1, 2022through Jun 30, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Andrews ZIP 79714 using 464.5 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
464.5 PPM is 4× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Arsenic has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 464.5 PPM, or 27.2 grains per gallon, classified as very hard. This is not a household tap measurement.
At 464.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.