Hardness
Hard
122.9 PPM · 7.2 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Travis County.
At a glance
EPA quarter 2026Q2
Hardness
Hard
122.9 PPM · 7.2 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 1,115,323 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
122.9 PPM
Parts per million
122.9
mg/L as CaCO₃ equivalent
Grains per gallon
7.2
1 GPG ≈ 17.1 PPM
What this means at home
At 122.9 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
18
Nearest site
7.7 mi
Observation range
Sep 20, 2016–Jun 15, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Williamson Ck at Brush Cntry Blvd, Oak Hill, TX (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Austin median
86 PPM
37 PPM higher39 indexed ZIP readings · Range 83.8–162.5 PPM
Texas median
111 PPM
12 PPM higher1019 indexed ZIP readings · Range 5.4–500.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Interim Enhanced Surface Water Treatment RuleHealth-based | TX2270001 | Resolved | Feb 1, 2022through Feb 28, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Austin ZIP 78744 using 122.9 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
122.9 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 122.9 PPM, or 7.2 grains per gallon, classified as hard. This is not a household tap measurement.
At 122.9 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.