Hardness
Moderately Hard
83.7 PPM · 4.9 GPG
Local water dashboard
Official source aggregationWater quality in Blossom, TX 75416
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Lamar County.
No active health-based violation reported
- Primary matched system
- City Of Blossom
- Source water
- Surface water
- County
- Lamar County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 2,007 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
83.7 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
83.7
mg/L as CaCO₃ equivalent
Grains per gallon
4.9
1 GPG ≈ 17.1 PPM
What this means at home
At 83.7 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
18
Nearest site
24.3 mi
Observation range
Mar 21, 2016–Jun 4, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Pat Mayse Lk, Site MY nr Chicota, TX (Lake, Reservoir, Impoundment).USGS source documentation ↗
Regional context
Is 75416 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Blossom median
84 PPM
About the same1 indexed ZIP readings · Range 83.7–83.7 PPM
Texas median
111 PPM
27 PPM lower1019 indexed ZIP readings · Range 5.4–500.5 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0 mg/L
Reported Dec 31, 2025
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 16
- Health-based
- 1
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Public Notice | TX1390004 | Resolved | Feb 16, 2025through Apr 28, 2025 |
| Lead and Copper Rule | TX1390004 | Resolved | Jan 1, 2025through Mar 27, 2025 |
| LEAD AND COPPER RULE REVISIONSHealth-based | TX1390004 | Resolved | Oct 17, 2024through Apr 22, 2025 |
| LEAD AND COPPER RULE REVISIONS | TX1390004 | Resolved | Oct 17, 2024through Apr 22, 2025 |
| Lead and Copper Rule | TX1390004 | Resolved | Sep 29, 2024through Apr 7, 2025 |
| Consumer Confidence Rule | TX1390004 | Resolved | Jul 1, 2024through Jun 2, 2025 |
| Chlorine | TX1390004 | Resolved | Jul 1, 2024through Sep 30, 2024 |
| Consumer Confidence Rule | TX1390004 | Resolved | Jul 1, 2023through Oct 31, 2023 |
| Lead and Copper Rule | TX1390004 | Resolved | Jul 1, 2023through Jan 5, 2024 |
| Public Notice | TX1390004 | Resolved | Jun 1, 2023through Jul 7, 2023 |
| Public Notice | TX1390004 | Resolved | Dec 19, 2022through Jul 7, 2023 |
| Lead and Copper Rule | TX1390004 | Resolved | Oct 1, 2022through Jan 5, 2024 |
| Revised Total Coliform Rule | TX1390004 | Resolved | May 1, 2022through May 31, 2022 |
| Lead and Copper Rule | TX1390004 | Resolved | Oct 1, 2021through Jan 5, 2024 |
| Public Notice | TX1390004 | Resolved | Feb 14, 2021through Jul 7, 2023 |
| Public Notice | TX1390004 | Resolved | Jan 1, 2021through Jul 7, 2023 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Blossom ZIP 75416 using 83.7 PPM nearby hardness and 1 reported measurement benchmarks.
No urgent match
Start with an independent water test
This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.
Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Blossom
Is tap water safe in Blossom?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 83.7 PPM, or 4.9 grains per gallon, classified as moderately hard. This is not a household tap measurement.
Do I need a water softener?+
There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.