Utility-reported hardness
Unavailable
Ask your provider or test your tap
Local water dashboard
Official source aggregationWater quality in Commerce, TX 75429
Regional hardness evidence, possible serving systems, EPA compliance history, and the measurements that are—and are not—available for Hunt County.
No active health-based violation reported
- Largest possible serving system
- City Of Commerce
- Source water
- Surface water
- County
- Hunt County
- Profile updated
Your tap water
What does the utility report?
Match the utility name to your water bill. These results describe the utility’s water, not a test at your home. A ZIP can include several water systems.
Utility hardness unavailable in this index
Nearby river or groundwater samples cannot tell us the hardness coming out of your tap. Ask your water provider for total hardness as CaCO₃, or test it at home.
Find an official utility report →At a glance
What the current records say
EPA quarter 2026Q2
All possible systems
No active flag
0 active health-based records
Measurements by utility
Each result belongs to a specific system.
Utility match
1 system
Serves 9,266 people system-wide
Match the name on your water bill
Your utility’s measurements and compliance records
These are possible serving systems. A record for one system does not apply to every home in this ZIP. Confirm your provider before interpreting a measurement or notice. Federal records can lag current utility notices.
EPA snapshot: 2026Q2. Historical window begins Jan 1, 2021.
City Of Commerce
TX1160003 · Surface water · 9,266 people served system-wide
A municipal system, in-state city, and served county all agree with this Census ZCTA.
No active health-based record in this imported snapshot
Find this utility’s official report →Measurements (1)
An action level is a regulatory trigger, not a pass/fail health boundary. A reported zero is the value in the source record and does not establish that lead is absent at your tap.
Lead (90th percentile)
EPA SDWIS Lead and Copper Rule samples
- Reported level
- 0 mg/L
- Action level
- 0.015 mg/L
0% of the listed benchmark
Monitoring period: Jan 1, 2021 to Dec 31, 2023
Violation history (6)
| Rule | Status | Period |
|---|---|---|
| Revised Total Coliform Rule | Resolved | Oct 1, 2023 to Oct 31, 2023 |
| Revised Total Coliform Rule | Resolved | Jan 1, 2023 to Jan 31, 2023 |
| Public Notice | Resolved | Aug 31, 2022 to Sep 28, 2022 |
| Interim Enhanced Surface Water Treatment RuleHealth-based | Resolved | Jul 1, 2022 to Jul 31, 2022 |
| Interim Enhanced Surface Water Treatment RuleHealth-based | Resolved | Jul 1, 2022 to Jul 31, 2022 |
| Public Notice | Resolved | Dec 1, 2021 to Jan 17, 2022 |
Hardness meter
What does nearby environmental evidence show?
79.5
PPM as CaCO₃
Moderately Hard
PPM
79.5
GPG
4.6
Regional environmental evidence
USGS hardness classification scale
79.5 PPM
Soft
0–60Moderate
61–120Hard
121–180Very hard
181+
0–60Moderate
61–120Hard
121–180Very hard
181+
Parts per million
79.5
mg/L as CaCO₃ equivalent
Grains per gallon
4.6
1 GPG ≈ 17.1 PPM
How to use regional evidence
These samples describe nearby environmental water. They cannot establish whether your tap water is soft or hard. Use a utility result or a tap test for appliance settings and treatment sizing.
USGS sites used
1
Nearest site
23.5 mi
Observation range
May 15, 2024–May 15, 2024
Regional evidence confidence
Low
Median of the latest source-type-aligned hardness observation at each monitoring site within 25 miles. Nearest monitoring location: Lk Tawakoni at Wind Point Pk nr Lone Oak, TX (Lake, Reservoir, Impoundment).USGS source documentation ↗Evidence tier: Regional environmental evidence. This value is not used as proof of the serving utility's treated-water hardness.
Regional context
Is 75429 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Commerce median
80 PPM
About the same2 indexed ZIP readings · Range 79.5–79.5 PPM
Texas median
118 PPM
38 PPM lower741 indexed ZIP readings · Range 5.4–1400 PPM
Evidence-first next steps
Confirm the problem before choosing treatment
This profile can help you ask the right question. It cannot select equipment for a property without a current result from the serving utility or the tap.
Confirm the serving system
ZIP boundaries and utility service areas do not perfectly match. Verify the system on a water bill before relying on system-wide records.
Read the current utility report
Use the current Consumer Confidence Report for treated-water results and official notices.
Find an official utility report →Test for the decision you face
Use a tap hardness test before sizing a softener. For health concerns, use a certified laboratory and the correct sampling protocol.
Convert your hardness test result →Nearby indexed reports
More local profiles in Commerce
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
Water questions for Commerce
Is tap water safe in Commerce?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Utility-reported hardness is unavailable in this index. Regional samples do not establish tap-water hardness. Ask your provider or test your tap.
Do I need a water softener?+
Confirm hardness at your tap and consider actual scale or spotting before choosing treatment. Regional environmental values cannot determine whether you need a softener. A softener addresses hardness, not every contaminant.