Skip to content

Local water dashboard

Official source aggregation

Water quality in Danbury, TX 77534

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Brazoria County.

1 reported benchmark flag
Primary matched system
City Of Danbury
Source water
Groundwater
County
Brazoria County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

197 PPM · 11.5 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 1,673 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

197 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

197

mg/L as CaCO₃ equivalent

Grains per gallon

11.5

1 GPG ≈ 17.1 PPM

What this means at home

At 197 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

41

Nearest site

10.9 mi

Observation range

Aug 9, 2016–Jun 12, 2025

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: BH-65-45-5xx (TxWR 463356) (Well).USGS source documentation ↗

Regional context

Is 77534 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Danbury median

197 PPM

About the same

1 indexed ZIP readings · Range 197–197 PPM

Texas median

111 PPM

86 PPM higher

1019 indexed ZIP readings · Range 5.4–500.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

TTHM

Measured in MG/L

Fail

Local 0.081

EPA limit 0.08

Local level is 101% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
6
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Public NoticeTX0200011ResolvedApr 27, 2026through May 4, 2026
TTHMHealth-basedReported 0.081 MG/L · MCL 0.08TX0200011ResolvedJan 1, 2026through Mar 31, 2026
LEAD AND COPPER RULE REVISIONSTX0200011ResolvedJul 2, 2025through Apr 9, 2026
Consumer Confidence RuleTX0200011ResolvedJul 2, 2024through Sep 16, 2024
Revised Total Coliform RuleTX0200011ResolvedMay 1, 2021through May 31, 2021
Revised Total Coliform RuleTX0200011ResolvedApr 1, 2021through Apr 30, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Danbury ZIP 77534 using 197 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

197 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

TTHM has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Danbury

Is tap water safe in Danbury?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 197 PPM, or 11.5 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 197 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.