Skip to content

Local water dashboard

Official source aggregation

Water quality in Friona, TX 79035

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Parmer County.

1 reported benchmark flag
Primary matched system
Friona Municipal Water System
Source water
Groundwater
County
Parmer County
Profile updated

At a glance

What the current records say

Hardness

Very Hard

258 PPM · 15.1 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 4,653 people system-wide

Hardness meter

How hard is the water?

Very Hard

Estimated local hardness

USGS hardness classification scale

258 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

258

mg/L as CaCO₃ equivalent

Grains per gallon

15.1

1 GPG ≈ 17.1 PPM

What this means at home

At 258 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

58

Nearest site

4.7 mi

Observation range

May 24, 2016–Aug 15, 2023

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: UR-10-19-712 (Well).USGS source documentation ↗

Regional context

Is 79035 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Friona median

258 PPM

About the same

1 indexed ZIP readings · Range 258–258 PPM

Texas median

111 PPM

147 PPM higher

1019 indexed ZIP readings · Range 5.4–500.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

ETHYLENE DIBROMIDE

Measured in MG/L

Fail

Local 7.0e-5

EPA limit 5.0e-5

Local level is 140% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
7
Health-based
2
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Public NoticeTX1850003UnaddressedApr 2, 2026
Public NoticeTX1850003UnaddressedMay 1, 2025
LEAD AND COPPER RULE REVISIONSHealth-basedTX1850003ResolvedOct 17, 2024through Jul 11, 2025
LEAD AND COPPER RULE REVISIONSTX1850003ResolvedOct 17, 2024through Jul 11, 2025
Consumer Confidence RuleTX1850003ResolvedJul 2, 2024through Sep 12, 2024
ETHYLENE DIBROMIDEHealth-basedReported 7.0e-5 MG/L · MCL 5.0e-5TX1850003ResolvedJul 1, 2021through Sep 30, 2021
ChlorineTX1850003ResolvedJul 1, 2021through Sep 30, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Friona ZIP 79035 using 258 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

258 PPM is 2× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

ETHYLENE DIBROMIDE has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Friona

Is tap water safe in Friona?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 258 PPM, or 15.1 grains per gallon, classified as very hard. This is not a household tap measurement.

Do I need a water softener?+

At 258 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.