Hardness
Very Hard
332 PPM · 19.4 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Williamson County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
332 PPM · 19.4 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.004 mg/L
26% of action level
Utility match
1 system
Serves 1,914 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
332 PPM
Parts per million
332
mg/L as CaCO₃ equivalent
Grains per gallon
19.4
1 GPG ≈ 17.1 PPM
What this means at home
At 332 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
47
Nearest site
1.3 mi
Observation range
Feb 15, 2016–Apr 30, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: ZK-58-21-204 (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Granger median
332 PPM
About the same1 indexed ZIP readings · Range 332–332 PPM
Texas median
111 PPM
221 PPM higher1019 indexed ZIP readings · Range 5.4–500.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.004 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.004
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Revised Total Coliform Rule | TX2460002 | Resolved | Oct 1, 2025through Oct 31, 2025 |
| LEAD AND COPPER RULE REVISIONS | TX2460002 | Unaddressed | Jul 2, 2025 |
| Consumer Confidence Rule | TX2460002 | Unaddressed | Jul 1, 2025 |
| Lead and Copper Rule | TX2460002 | Resolved | Dec 30, 2024through Feb 7, 2025 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Granger ZIP 76530 using 332 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
332 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 332 PPM, or 19.4 grains per gallon, classified as very hard. This is not a household tap measurement.
At 332 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.