Skip to content

Local water dashboard

Official source aggregation

Water quality in La Marque, TX 77568

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Galveston County.

No active health-based violation reported
Primary matched system
City Of La Marque
Source water
Surface water
County
Galveston County
Profile updated

At a glance

What the current records say

Hardness

Moderately Hard

76.2 PPM · 4.5 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

5.8e-4 mg/L

4% of action level

Utility match

1 system

Serves 15,154 people system-wide

Hardness meter

How hard is the water?

Moderately Hard

Estimated local hardness

USGS hardness classification scale

76.2 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

76.2

mg/L as CaCO₃ equivalent

Grains per gallon

4.5

1 GPG ≈ 17.1 PPM

What this means at home

At 76.2 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

11

Nearest site

28.3 mi

Observation range

Jan 14, 2016–May 19, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Lynchburg Res nr Intake Structure nr Baytown, TX (Lake, Reservoir, Impoundment).USGS source documentation ↗

Regional context

Is 77568 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

La Marque median

76 PPM

About the same

1 indexed ZIP readings · Range 76.2–76.2 PPM

Texas median

111 PPM

35 PPM lower

1019 indexed ZIP readings · Range 5.4–500.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

5.8e-4 mg/L

Reported Dec 31, 2025

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 5.8e-4

EPA limit 0.015

Local level is 4% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
6
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleTX0840006UnaddressedDec 30, 2025
LEAD AND COPPER RULE REVISIONSTX0840006UnaddressedJul 2, 2025
ChlorineTX0840006ResolvedJul 1, 2025through Sep 30, 2025
Consumer Confidence RuleTX0840006UnaddressedJul 1, 2025
Public NoticeTX0840006UnaddressedOct 1, 2023
Revised Total Coliform RuleTX0840006ResolvedSep 1, 2022through Sep 30, 2022

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to La Marque ZIP 77568 using 76.2 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for La Marque

Is tap water safe in La Marque?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 76.2 PPM, or 4.5 grains per gallon, classified as moderately hard. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.