Hardness
Hard
144 PPM · 8.4 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Midland County.
At a glance
EPA quarter 2026Q2
Hardness
Hard
144 PPM · 8.4 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0015 mg/L
10% of action level
Utility match
1 system
Serves 157,000 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
144 PPM
Parts per million
144
mg/L as CaCO₃ equivalent
Grains per gallon
8.4
1 GPG ≈ 17.1 PPM
What this means at home
At 144 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
2
Nearest site
65.6 mi
Observation range
Aug 16, 2018–Oct 13, 2020
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Lk J. B. Thomas at Intake nr Ira, TX (Lake, Reservoir, Impoundment).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Midland median
144 PPM
About the same4 indexed ZIP readings · Range 144–144 PPM
Texas median
111 PPM
33 PPM higher1019 indexed ZIP readings · Range 5.4–500.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0015 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0015
EPA limit 0.015
Measured in MG/L
Local 0.011
EPA limit 0.01
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Public Notice | TX1650001 | Unaddressed | Mar 3, 2026 |
| Interim Enhanced Surface Water Treatment RuleHealth-based | TX1650001 | Resolved | Jan 1, 2026through Jan 31, 2026 |
| Interim Enhanced Surface Water Treatment RuleHealth-based | TX1650001 | Resolved | Jan 1, 2026through Jan 31, 2026 |
| Public Notice | TX1650001 | Unaddressed | Jan 1, 2026 |
| Interim Enhanced Surface Water Treatment RuleHealth-based | TX1650001 | Resolved | Nov 1, 2024through Nov 30, 2024 |
| ArsenicHealth-basedReported 0.011 MG/L · MCL 0.01 | TX1650001 | Resolved | Oct 1, 2023through Dec 31, 2023 |
| Interim Enhanced Surface Water Treatment RuleHealth-based | TX1650001 | Resolved | Jan 1, 2023through Jan 31, 2023 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Midland ZIP 79701 using 144 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
144 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Arsenic has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 144 PPM, or 8.4 grains per gallon, classified as hard. This is not a household tap measurement.
At 144 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.