Hardness
Hard
135 PPM · 7.9 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for San Patricio County.
At a glance
EPA quarter 2026Q2
Hardness
Hard
135 PPM · 7.9 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0015 mg/L
10% of action level
Utility match
1 system
Serves 2,250 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
135 PPM
Parts per million
135
mg/L as CaCO₃ equivalent
Grains per gallon
7.9
1 GPG ≈ 17.1 PPM
What this means at home
At 135 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
7
Nearest site
47.6 mi
Observation range
Feb 1, 2016–Feb 10, 2016
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: KP-79-27-2xx (Well).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Odem median
135 PPM
About the same1 indexed ZIP readings · Range 135–135 PPM
Texas median
111 PPM
24 PPM higher1019 indexed ZIP readings · Range 5.4–500.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0015 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0015
EPA limit 0.015
Measured in MG/L
Local 0.083
EPA limit 0.08
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Lead and Copper Rule | TX2050004 | Unaddressed | Jan 1, 2026 |
| Lead and Copper Rule | TX2050004 | Unaddressed | Jul 1, 2025 |
| Revised Total Coliform Rule | TX2050004 | Resolved | Feb 1, 2025through Feb 28, 2025 |
| Lead and Copper Rule | TX2050004 | Unaddressed | Jan 1, 2025 |
| Lead and Copper Rule | TX2050004 | Resolved | Sep 29, 2024through Mar 17, 2025 |
| Lead and Copper Rule | TX2050004 | Resolved | Jul 1, 2024through Feb 7, 2025 |
| Revised Total Coliform Rule | TX2050004 | Resolved | Mar 1, 2024through Mar 31, 2024 |
| Revised Total Coliform Rule | TX2050004 | Resolved | Feb 1, 2024through Feb 29, 2024 |
| Chlorine | TX2050004 | Resolved | Jan 1, 2024through Mar 31, 2024 |
| Lead and Copper Rule | TX2050004 | Resolved | Oct 1, 2023through Jul 1, 2024 |
| Revised Total Coliform Rule | TX2050004 | Resolved | Sep 1, 2023through Sep 30, 2023 |
| Revised Total Coliform Rule | TX2050004 | Resolved | Aug 1, 2023through Aug 31, 2023 |
| TTHMHealth-basedReported 0.083 MG/L · MCL 0.08 | TX2050004 | Resolved | Oct 1, 2021through Dec 31, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Odem ZIP 78370 using 135 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
135 PPM is 1× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
TTHM has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 135 PPM, or 7.9 grains per gallon, classified as hard. This is not a household tap measurement.
At 135 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.