Skip to content

Local water dashboard

Official source aggregation

Water quality in Tolar, TX 76476

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Hood County.

No active health-based violation reported
Primary matched system
City Of Tolar
Source water
Groundwater
County
Hood County
Profile updated

At a glance

What the current records say

Hardness

Soft

21.1 PPM · 1.2 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0019 mg/L

12% of action level

Utility match

1 system

Serves 1,461 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

21.1 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

21.1

mg/L as CaCO₃ equivalent

Grains per gallon

1.2

1 GPG ≈ 17.1 PPM

What this means at home

At 21.1 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

10

Nearest site

20.7 mi

Observation range

Nov 28, 2016–Jan 26, 2017

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: JP-31-55-801 (Well).USGS source documentation ↗

Regional context

Is 76476 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Tolar median

21 PPM

About the same

1 indexed ZIP readings · Range 21.1–21.1 PPM

Texas median

111 PPM

90 PPM lower

1019 indexed ZIP readings · Range 5.4–500.5 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0019 mg/L

Reported Dec 31, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0019

EPA limit 0.015

Local level is 12% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
5
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Public NoticeTX1110012UnaddressedNov 16, 2025
LEAD AND COPPER RULE REVISIONSTX1110012ResolvedJul 2, 2025through Apr 7, 2026
Consumer Confidence RuleTX1110012ResolvedJul 1, 2025through Jan 12, 2026
Revised Total Coliform RuleTX1110012ResolvedSep 1, 2024through Sep 30, 2024
Lead and Copper RuleTX1110012UnaddressedDec 30, 2020

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Tolar ZIP 76476 using 21.1 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Tolar

Is tap water safe in Tolar?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 21.1 PPM, or 1.2 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.