Hardness
Very Hard
183.5 PPM · 10.7 GPG
Local water dashboard
Official source aggregationWater quality in Waller, TX 77484
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Waller County.
No active health-based violation reported
- Primary matched system
- City Of Waller
- Source water
- Groundwater
- County
- Waller County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0015 mg/L
10% of action level
Utility match
1 system
Serves 5,448 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
183.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
183.5
mg/L as CaCO₃ equivalent
Grains per gallon
10.7
1 GPG ≈ 17.1 PPM
What this means at home
At 183.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
54
Nearest site
6.6 mi
Observation range
Feb 17, 2016–Jun 12, 2025
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: YW-60-58-205 (Well).USGS source documentation ↗
Regional context
Is 77484 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Waller median
184 PPM
About the same1 indexed ZIP readings · Range 183.5–183.5 PPM
Texas median
111 PPM
73 PPM higher1019 indexed ZIP readings · Range 5.4–500.5 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0.0015 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0015
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 5
- Health-based
- 1
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | TX2370003 | Unaddressed | Jul 2, 2025 |
| LEAD AND COPPER RULE REVISIONS | TX2370003 | Resolved | Oct 17, 2024through Apr 22, 2025 |
| LEAD AND COPPER RULE REVISIONSHealth-based | TX2370003 | Resolved | Oct 17, 2024through Apr 22, 2025 |
| E. COLI | TX2370003 | Resolved | Aug 7, 2024through Nov 5, 2024 |
| Revised Total Coliform Rule | TX2370003 | Resolved | Dec 1, 2023through Dec 31, 2023 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Waller ZIP 77484 using 183.5 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
183.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Waller
Is tap water safe in Waller?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 183.5 PPM, or 10.7 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 183.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.