Hardness
Very Hard
546 PPM · 31.9 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Carbon County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
546 PPM · 31.9 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
1 system
Serves 1,460 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
546 PPM
Parts per million
546
mg/L as CaCO₃ equivalent
Grains per gallon
31.9
1 GPG ≈ 17.1 PPM
What this means at home
At 546 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
23
Nearest site
18.8 mi
Observation range
Jan 6, 2016–Jun 9, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: PRICE RIVER AT WOODSIDE, UT (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
East Carbon median
546 PPM
About the same2 indexed ZIP readings · Range 546–546 PPM
Utah median
364 PPM
182 PPM higher66 indexed ZIP readings · Range 257–686.5 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0 mg/L
Reported Dec 31, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Lead and Copper Rule | UTAH04012 | Unaddressed | Mar 20, 2025 |
| Groundwater RuleHealth-based | UTAH04012 | Resolved | Jul 2, 2024through Jun 3, 2025 |
| TTHM | UTAH04012 | Resolved | Jan 1, 2023through Mar 31, 2023 |
| Total Haloacetic Acids (HAA5) | UTAH04012 | Resolved | Jan 1, 2023through Mar 31, 2023 |
| CARBON, TOTAL | UTAH04012 | Resolved | Jan 1, 2022through Feb 24, 2022 |
| Long Term 2 Enhanced Surface Water Treatment RuleHealth-based | UTAH04012 | Resolved | Sep 1, 2021through Sep 30, 2021 |
| Public Notice | UTAH04012 | Resolved | Sep 1, 2021through Oct 7, 2021 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to East Carbon ZIP 84520 using 546 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
546 PPM is 5× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 546 PPM, or 31.9 grains per gallon, classified as very hard. This is not a household tap measurement.
At 546 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.