Skip to content

Local water dashboard

Official source aggregation

Water quality in Ellison Bay, WI 54210

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Door County.

1 reported benchmark flag
Primary matched system
Cottage Glen Condominiums
Source water
Groundwater
County
Door County
Profile updated

At a glance

What the current records say

Hardness

Hard

123 PPM · 7.2 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0013 mg/L

8% of action level

Utility match

1 system

Serves 52 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

123 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

123

mg/L as CaCO₃ equivalent

Grains per gallon

7.2

1 GPG ≈ 17.1 PPM

What this means at home

At 123 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

3

Nearest site

43 mi

Observation range

Aug 21, 2024–Sep 10, 2024

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MT-33/21E/20-0258 (Well).USGS source documentation ↗

Regional context

Is 54210 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Ellison Bay median

123 PPM

About the same

1 indexed ZIP readings · Range 123–123 PPM

Wisconsin median

288 PPM

165 PPM lower

556 indexed ZIP readings · Range 41.3–467 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0.0013 mg/L

Reported Sep 30, 2025

Copper (CU90)

2.25 mg/L

Reported Oct 2, 2001

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0013

EPA limit 0.015

Local level is 8% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 2.25

EPA limit 1.3

Local level is 173% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
2
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Combined Radium (-226 and -228)WI4150000ResolvedJan 1, 2024through Dec 31, 2024
Radium-226WI4150000ResolvedJan 1, 2024through Dec 31, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Ellison Bay ZIP 54210 using 123 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

123 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Ellison Bay

Is tap water safe in Ellison Bay?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 123 PPM, or 7.2 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 123 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.