Skip to content

Local water dashboard

Official source aggregation

Water quality in Hawkins, WI 54530

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Rusk County.

No active health-based violation reported
Primary matched system
Hawkins Waterworks
Source water
Groundwater
County
Rusk County
Profile updated

At a glance

What the current records say

Hardness

Soft

41.3 PPM · 2.4 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

1.0e-3 mg/L

7% of action level

Utility match

2 systems

Serves 333 people system-wide

Hardness meter

How hard is the water?

Soft

Estimated local hardness

USGS hardness classification scale

41.3 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

41.3

mg/L as CaCO₃ equivalent

Grains per gallon

2.4

1 GPG ≈ 17.1 PPM

What this means at home

At 41.3 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

7

Nearest site

59.9 mi

Observation range

Feb 1, 2016–Feb 3, 2021

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: TROUT RIVER AT TROUT LAKE NEAR BOULDER JUNCTION,WI (Stream).USGS source documentation ↗

Regional context

Is 54530 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Hawkins median

41 PPM

About the same

1 indexed ZIP readings · Range 41.3–41.3 PPM

Wisconsin median

288 PPM

247 PPM lower

556 indexed ZIP readings · Range 41.3–467 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

1.0e-3 mg/L

Reported Sep 30, 2023

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 1.0e-3

EPA limit 0.015

Local level is 7% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
5
Health-based
1
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Lead and Copper RuleWI8581145ResolvedJan 1, 2024through Feb 17, 2024
Consumer Confidence RuleWI8550129ResolvedJul 1, 2023through Aug 28, 2023
Consumer Confidence RuleWI8550129ResolvedJul 1, 2023through Aug 28, 2023
Stage 1 Disinfectants and Disinfection Byproducts RuleHealth-basedWI8550129ResolvedFeb 23, 2022through Mar 16, 2022
Revised Total Coliform RuleWI8550129ResolvedFeb 1, 2021through Feb 28, 2021

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Hawkins ZIP 54530 using 41.3 PPM nearby hardness and 1 reported measurement benchmarks.

0 matches

No urgent match

Start with an independent water test

This profile does not trigger a treatment recommendation. Test at the tap before investing in equipment.

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Hawkins

Is tap water safe in Hawkins?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 41.3 PPM, or 2.4 grains per gallon, classified as soft. This is not a household tap measurement.

Do I need a water softener?+

There is no high-hardness trigger in this profile. Confirm with a tap test before buying equipment.