Hardness
Very Hard
243 PPM · 14.2 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Milwaukee County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
243 PPM · 14.2 GPG
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0021 mg/L
14% of action level
Utility match
2 systems
Serves 626,000 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
243 PPM
Parts per million
243
mg/L as CaCO₃ equivalent
Grains per gallon
14.2
1 GPG ≈ 17.1 PPM
What this means at home
At 243 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
21
Nearest site
7.9 mi
Observation range
Apr 12, 2016–Jun 10, 2026
Estimate confidence
Moderate
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: MILWAUKEE RIVER AT MOUTH AT MILWAUKEE, WI (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Milwaukee median
243 PPM
About the same22 indexed ZIP readings · Range 243–254 PPM
Wisconsin median
288 PPM
45 PPM lower556 indexed ZIP readings · Range 41.3–467 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.0021 mg/L
Reported Sep 30, 2024
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.0021
EPA limit 0.015
100% line = listed limit
No violation record was returned for the associated systems in the imported lookback window beginning Jan 1, 2021.
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Milwaukee ZIP 53222 using 243 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
243 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Nearby indexed reports
Estimates can differ across a city because monitoring locations and associated systems differ.
Frequently asked
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
Nearby USGS observations produce an estimate of 243 PPM, or 14.2 grains per gallon, classified as very hard. This is not a household tap measurement.
At 243 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.