Skip to content

Local water dashboard

Official source aggregation

Water quality in New Martinsville, WV 26155

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wetzel County.

1 reported benchmark flag
Primary matched system
New Martinsville
Source water
Groundwater
County
Wetzel County
Profile updated

At a glance

What the current records say

Hardness

Hard

148 PPM · 8.7 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0011 mg/L

7% of action level

Utility match

1 system

Serves 5,272 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

148 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

148

mg/L as CaCO₃ equivalent

Grains per gallon

8.7

1 GPG ≈ 17.1 PPM

What this means at home

At 148 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

60

Nearest site

3.4 mi

Observation range

Jun 1, 2016–Jun 1, 2026

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: Wet-0141 (Well).USGS source documentation ↗

Regional context

Is 26155 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

New Martinsville median

148 PPM

About the same

1 indexed ZIP readings · Range 148–148 PPM

West Virginia median

141 PPM

7 PPM higher

219 indexed ZIP readings · Range 85.5–265 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0.0011 mg/L

Reported Dec 31, 2025

Copper (CU90)

1.43 mg/L

Reported Dec 31, 2018

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0011

EPA limit 0.015

Local level is 7% of the listed EPA limit.

Copper (90th percentile)

Measured in mg/L

Fail

Local 1.43

EPA limit 1.3

Local level is 110% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
32
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 19, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Public NoticeWV3305203ResolvedAug 14, 2025through Nov 17, 2025
Lead and Copper RuleWV3305203UnaddressedJul 1, 2025
Public NoticeWV3305203UnaddressedFeb 15, 2025
Public NoticeWV3305203UnaddressedFeb 15, 2025
Public NoticeWV3305203UnaddressedFeb 15, 2025

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to New Martinsville ZIP 26155 using 148 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

148 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for New Martinsville

Is tap water safe in New Martinsville?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 148 PPM, or 8.7 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 148 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.