Skip to content

Local water dashboard

Official source aggregation

Water quality in Wayne, WV 25570

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Wayne County.

14 active health-based violations
Primary matched system
Wayne Water Town Of
Source water
Surface water
County
Wayne County
Profile updated

At a glance

What the current records say

Hardness

Hard

140 PPM · 8.2 GPG

Compliance screen

Review needed

14 active health-based records

Lead 90th percentile

0 mg/L

0% of action level

Utility match

1 system

Serves 5,519 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

140 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

140

mg/L as CaCO₃ equivalent

Grains per gallon

8.2

1 GPG ≈ 17.1 PPM

What this means at home

At 140 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

7

Nearest site

13.1 mi

Observation range

Nov 4, 2019–Oct 23, 2024

Estimate confidence

Moderate

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: 074.0 TUG FORK AT FORT GAY, WV (Stream).USGS source documentation ↗

Regional context

Is 25570 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Wayne median

140 PPM

About the same

1 indexed ZIP readings · Range 140–140 PPM

West Virginia median

141 PPM

About the same

219 indexed ZIP readings · Range 85.5–265 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass1 fail

Lead (PB90)

0 mg/L

Reported Dec 31, 2027

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

2 comparable results

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0

EPA limit 0.015

Local level is 0% of the listed EPA limit.

TTHM

Measured in UG/L

Fail

Local 81

EPA limit 0.08

Local level is 101250% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
23
Health-based
15
Active health-based
14
Contaminant or ruleSystemStatusPeriod
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Long Term 2 Enhanced Surface Water Treatment RuleHealth-basedWV3305007UnaddressedAug 13, 2025
Surface Water Treatment RuleWV3305007ArchivedAug 1, 2025through Aug 31, 2025
Surface Water Treatment RuleWV3305007ArchivedJul 1, 2025through Jul 31, 2025
ChlorineWV3305007ArchivedJul 1, 2025through Jul 31, 2025
Public NoticeWV3305007ResolvedOct 30, 2023through May 15, 2024
TTHMHealth-basedReported 81 UG/L · MCL 0.08WV3305007ResolvedJul 1, 2023through Sep 30, 2023
ChlorineWV3305007ResolvedJan 1, 2023through Mar 10, 2023

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Wayne ZIP 25570 using 140 PPM nearby hardness and 2 reported measurement benchmarks.

2 matches

Scale protection

High-Capacity Whole House Water Softener

140 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Drinking water protection

Under-Sink Reverse Osmosis System

TTHM, Long Term 2 Enhanced Surface Water Treatment Rule have a measured benchmark flag or active health-based SDWIS record in this profile.

A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.

Explore under-sink filtration

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Wayne

Is tap water safe in Wayne?+

EPA ECHO reports 14 active health-based violations among the associated community water systems. Review the affected utility's current notice and Consumer Confidence Report.

How hard is the water?+

Nearby USGS observations produce an estimate of 140 PPM, or 8.2 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 140 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.