Hardness
Very Hard
186.5 PPM · 10.9 GPG
Local water dashboard
Official source aggregationA source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Park County.
At a glance
EPA quarter 2026Q2
Hardness
Very Hard
186.5 PPM · 10.9 GPG
Compliance screen
Review needed
2 active health-based records
Lead 90th percentile
0.002 mg/L
13% of action level
Utility match
2 systems
Serves 327 people system-wide
Hardness meter
Estimated local hardness
USGS hardness classification scale
186.5 PPM
Parts per million
186.5
mg/L as CaCO₃ equivalent
Grains per gallon
10.9
1 GPG ≈ 17.1 PPM
What this means at home
At 186.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
12
Nearest site
25.8 mi
Observation range
Jan 11, 2016–Apr 14, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: SOUTH FORK SHOSHONE RIVER AB BUFFALO BILL RES, WY (Stream).USGS source documentation ↗
Regional context
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Meeteetse median
187 PPM
About the same1 indexed ZIP readings · Range 186.5–186.5 PPM
Wyoming median
235 PPM
48 PPM lower93 indexed ZIP readings · Range 3.2–1905 PPM
EPA benchmark screen
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
Lead (PB90)
0.002 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Measured in mg/L
Local 0.002
EPA limit 0.015
100% line = listed limit
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Groundwater RuleHealth-based | WY5601193 | Addressed | Nov 28, 2025 |
| Groundwater RuleHealth-based | WY5601193 | Addressed | Mar 7, 2024 |
| Di(2-ethylhexyl) phthalate | WY5601193 | Resolved | Jan 1, 2024through Dec 31, 2024 |
| Lead and Copper Rule | WY5601193 | Resolved | Dec 30, 2023through Feb 1, 2024 |
| Consumer Confidence Rule | WY5601193 | Unaddressed | Oct 1, 2021 |
| Consumer Confidence Rule | WY5601193 | Unaddressed | Oct 1, 2020 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Matched to Meeteetse ZIP 82433 using 186.5 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
186.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Groundwater Rule has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
EPA ECHO reports 2 active health-based violations among the associated community water systems. Review the affected utility's current notice and Consumer Confidence Report.
Nearby USGS observations produce an estimate of 186.5 PPM, or 10.9 grains per gallon, classified as very hard. This is not a household tap measurement.
At 186.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.