Hardness
Very Hard
242.5 PPM · 14.2 GPG
Local water dashboard
Official source aggregationWater quality in Bedford, IN 47421
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Lawrence County.
No active health-based violation reported
- Primary matched system
- Bedford City Utilities
- Source water
- Surface water
- County
- Lawrence County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0.0015 mg/L
10% of action level
Utility match
3 systems
Serves 14,000 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
242.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
242.5
mg/L as CaCO₃ equivalent
Grains per gallon
14.2
1 GPG ≈ 17.1 PPM
What this means at home
At 242.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
6
Nearest site
64.6 mi
Observation range
Jan 5, 2016–May 28, 2026
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: WHITE RIVER AT HAZLETON, IN (Stream).USGS source documentation ↗
Regional context
Is 47421 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Bedford median
243 PPM
About the same1 indexed ZIP readings · Range 242.5–242.5 PPM
Indiana median
313 PPM
70 PPM lower472 indexed ZIP readings · Range 132–371 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass
Lead (PB90)
0.0015 mg/L
Reported Dec 31, 2023
Copper (CU90)
Not available
No numerical 90th-percentile result
Numerical coverage
1 comparable result
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0.0015
EPA limit 0.015
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 26
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Consumer Confidence Rule | IN5247004 | Resolved | Jul 1, 2024through Aug 2, 2024 |
| Consumer Confidence Rule | IN5247002 | Resolved | Jul 1, 2024through Aug 2, 2024 |
| Revised Total Coliform Rule | IN5247004 | Resolved | Jan 6, 2023through Jan 26, 2023 |
| 1,2,4-Trichlorobenzene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| cis-1,2-Dichloroethylene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Xylenes, Total | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| DICHLOROMETHANE | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| 1,2-Dichloroethane | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Carbon tetrachloride | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| 1,1,2-Trichloroethane | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| CHLOROBENZENE | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Toluene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Styrene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Nitrate | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| 1,1,1-Trichloroethane | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| 1,1-Dichloroethylene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Trichloroethylene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Ethylbenzene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Vinyl chloride | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
| Benzene | IN5247001 | Resolved | Jan 1, 2022through Dec 31, 2022 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Bedford ZIP 47421 using 242.5 PPM nearby hardness and 1 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
242.5 PPM is 2× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Bedford
Is tap water safe in Bedford?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 242.5 PPM, or 14.2 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 242.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.