Utility-reported hardness
Unavailable
Ask your provider or test your tap
Local water dashboard
Official source aggregationWater quality in Culver, IN 46511
Regional hardness evidence, possible serving systems, EPA compliance history, and the measurements that are—and are not—available for Marshall County.
Historical measurement record needs context
- Largest possible serving system
- Culver Educational Foundation
- Source water
- Groundwater
- County
- Marshall County
- Profile updated
Your tap water
What does the utility report?
Match the utility name to your water bill. These results describe the utility’s water, not a test at your home. A ZIP can include several water systems.
Utility hardness unavailable in this index
Nearby river or groundwater samples cannot tell us the hardness coming out of your tap. Ask your water provider for total hardness as CaCO₃, or test it at home.
Find an official utility report →At a glance
What the current records say
EPA quarter 2026Q2
All possible systems
No active flag
0 active health-based records
Measurements by utility
Each result belongs to a specific system.
Utility match
2 systems
Serves 1,940 people system-wide
Match the name on your water bill
Your utility’s measurements and compliance records
These are possible serving systems. A record for one system does not apply to every home in this ZIP. Confirm your provider before interpreting a measurement or notice. Federal records can lag current utility notices.
EPA snapshot: 2026Q2. Historical window begins Jan 1, 2021.
Culver Educational Foundation
IN5250004 · Groundwater · 1,940 people served system-wide
The system names this served city; Census place overlap links the city to this ZCTA.
No active health-based record in this imported snapshot
Find this utility’s official report →Measurements (2)
An action level is a regulatory trigger, not a pass/fail health boundary. A reported zero is the value in the source record and does not establish that lead is absent at your tap.
Lead (90th percentile)
EPA SDWIS Lead and Copper Rule samples
- Reported level
- 0.0057 mg/L
- Action level
- 0.015 mg/L
38% of the listed benchmark
Monitoring period: Jul 1, 2003 to Dec 31, 2003
Copper (90th percentile)
EPA SDWIS Lead and Copper Rule samples
- Reported level
- 1.97 mg/L
- Action level
- 1.3 mg/L
152% of the listed benchmark
Monitoring period: Jan 1, 2014 to Dec 31, 2016
Violation history (1)
| Rule | Status | Period |
|---|---|---|
| Revised Total Coliform Rule | Resolved | Jul 1, 2022 to Jul 31, 2022 |
Culver Water Department
IN5250005 · Groundwater · 1,391 people served system-wide
The system names this served city; Census place overlap links the city to this ZCTA.
No active health-based record in this imported snapshot
Find this utility’s official report →Measurements (2)
An action level is a regulatory trigger, not a pass/fail health boundary. A reported zero is the value in the source record and does not establish that lead is absent at your tap.
Lead (90th percentile)
EPA SDWIS Lead and Copper Rule samples
- Reported level
- 0.0017 mg/L
- Action level
- 0.015 mg/L
12% of the listed benchmark
Monitoring period: Jan 1, 2022 to Dec 31, 2024
Copper (90th percentile)
EPA SDWIS Lead and Copper Rule samples
- Reported level
- 1.7 mg/L
- Action level
- 1.3 mg/L
131% of the listed benchmark
Monitoring period: Jan 1, 1994 to Jun 30, 1994
Violation history (0)
No record returned in this imported window. This is not a guarantee of tap-water safety.
Hardness meter
What does nearby environmental evidence show?
309.5
PPM as CaCO₃
Very Hard
PPM
309.5
GPG
18.1
Regional environmental evidence
USGS hardness classification scale
309.5 PPM
Soft
0–60Moderate
61–120Hard
121–180Very hard
181+
0–60Moderate
61–120Hard
121–180Very hard
181+
Parts per million
309.5
mg/L as CaCO₃ equivalent
Grains per gallon
18.1
1 GPG ≈ 17.1 PPM
How to use regional evidence
These samples describe nearby environmental water. They cannot establish whether your tap water is soft or hard. Use a utility result or a tap test for appliance settings and treatment sizing.
USGS sites used
6
Nearest site
18.8 mi
Observation range
Aug 30, 2023–May 13, 2026
Regional evidence confidence
Moderate
Median of the latest source-type-aligned hardness observation at each monitoring site within 25 miles. Nearest monitoring location: KANKAKEE WELL FIELD SH-3 NEAR HANNA, IN (Well).USGS source documentation ↗Evidence tier: Regional environmental evidence. This value is not used as proof of the serving utility's treated-water hardness.
Regional context
Is 46511 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Culver median
310 PPM
About the same1 indexed ZIP readings · Range 309.5–309.5 PPM
Indiana median
340 PPM
30 PPM lower290 indexed ZIP readings · Range 78.6–498 PPM
Evidence-first next steps
Confirm the problem before choosing treatment
This profile can help you ask the right question. It cannot select equipment for a property without a current result from the serving utility or the tap.
Confirm the serving system
ZIP boundaries and utility service areas do not perfectly match. Verify the system on a water bill before relying on system-wide records.
Read the current utility report
A reported action-level record needs context. Check its monitoring period and the utility's current report.
Find an official utility report →Test for the decision you face
Use a tap hardness test before sizing a softener. For health concerns, use a certified laboratory and the correct sampling protocol.
Convert your hardness test result →Frequently asked
Water questions for Culver
Is tap water safe in Culver?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Utility-reported hardness is unavailable in this index. Regional samples do not establish tap-water hardness. Ask your provider or test your tap.
Do I need a water softener?+
Confirm hardness at your tap and consider actual scale or spotting before choosing treatment. Regional environmental values cannot determine whether you need a softener. A softener addresses hardness, not every contaminant.