Skip to content

Local water dashboard

Official source aggregation

Water quality in Dale, IN 47523

A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Warrick County.

No active health-based violation reported
Primary matched system
Dale Water Works
Source water
Surface water
County
Warrick County
Profile updated

At a glance

What the current records say

Hardness

Hard

157 PPM · 9.2 GPG

Compliance screen

No active flag

0 active health-based records

Lead 90th percentile

0.0016 mg/L

11% of action level

Utility match

1 system

Serves 1,637 people system-wide

Hardness meter

How hard is the water?

Hard

Estimated local hardness

USGS hardness classification scale

157 PPM

Soft
0–59
Moderate
60–120
Hard
121–180
Very hard
181+

Parts per million

157

mg/L as CaCO₃ equivalent

Grains per gallon

9.2

1 GPG ≈ 17.1 PPM

What this means at home

At 157 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.

USGS sites used

3

Nearest site

26 mi

Observation range

Jan 5, 2016–May 28, 2026

Estimate confidence

Low

Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: OHIO RIVER AT CANNELTON DAM AT CANNELTON, IN (Stream).USGS source documentation ↗

Regional context

Is 47523 typical?

These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.

Dale median

157 PPM

About the same

1 indexed ZIP readings · Range 157–157 PPM

Indiana median

313 PPM

156 PPM lower

472 indexed ZIP readings · Range 132–371 PPM

EPA benchmark screen

Contaminant snapshot

Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.

1 pass

Lead (PB90)

0.0016 mg/L

Reported Dec 31, 2024

Copper (CU90)

Not available

No numerical 90th-percentile result

Numerical coverage

1 comparable result

Missing values remain blank; absence is not treated as a pass.

Lead (90th percentile)

Measured in mg/L

Pass

Local 0.0016

EPA limit 0.015

Local level is 11% of the listed EPA limit.

Share of EPA benchmark

100% line = listed limit

EPA SDWIS compliance

Reported violation history

Open EPA source documentation ↗
2026Q2
All records
5
Health-based
0
Active health-based
0
Contaminant or ruleSystemStatusPeriod
Consumer Confidence RuleIN5274002UnaddressedOct 1, 2025
Consumer Confidence RuleIN5274002UnaddressedJul 1, 2025
Consumer Confidence RuleIN5274002ResolvedJul 1, 2024through Aug 2, 2024
TTHMIN5274002ResolvedJul 1, 2024through Sep 30, 2024
Total Haloacetic Acids (HAA5)IN5274002ResolvedJul 1, 2024through Sep 30, 2024

No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.

Solutions matcher

Your personalized water action plan

Matched to Dale ZIP 47523 using 157 PPM nearby hardness and 1 reported measurement benchmarks.

1 match

Scale protection

High-Capacity Whole House Water Softener

157 PPM is 1× the high-hardness trigger used by this matcher.

Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.

Compare whole-house systems

Affiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.

Frequently asked

Water questions for Dale

Is tap water safe in Dale?+

EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.

How hard is the water?+

Nearby USGS observations produce an estimate of 157 PPM, or 9.2 grains per gallon, classified as hard. This is not a household tap measurement.

Do I need a water softener?+

At 157 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.