Hardness
Very Hard
364.5 PPM · 21.3 GPG
Local water dashboard
Official source aggregationWater quality in Monroe, IN 46772
A source-transparent look at local hardness, associated public water systems, EPA compliance history, and the measurements that are—and are not—available for Adams County.
1 reported benchmark flag
- Primary matched system
- Monroe Water Department
- Source water
- Groundwater
- County
- Adams County
- Profile updated
At a glance
What the current records say
EPA quarter 2026Q2
Compliance screen
No active flag
0 active health-based records
Lead 90th percentile
0 mg/L
0% of action level
Utility match
2 systems
Serves 872 people system-wide
Hardness meter
How hard is the water?
Estimated local hardness
USGS hardness classification scale
364.5 PPM
Soft
0–59Moderate
60–120Hard
121–180Very hard
181+
0–59Moderate
60–120Hard
121–180Very hard
181+
Parts per million
364.5
mg/L as CaCO₃ equivalent
Grains per gallon
21.3
1 GPG ≈ 17.1 PPM
What this means at home
At 364.5 PPM, mineral scale can build up on fixtures and heating elements, reduce soap lather, and leave visible spotting. Hardness is primarily an aesthetic and appliance concern—not itself a tap-water safety rating.
USGS sites used
48
Nearest site
37.7 mi
Observation range
Jun 20, 2016–Sep 10, 2025
Estimate confidence
Low
Median of the latest qualifying hardness observation at each nearby monitoring site. Nearest monitoring location: IN5268010 RANDOLPH 00893 PRODUCTION WELL 20 (Well).USGS source documentation ↗
Regional context
Is 46772 typical?
These comparisons use other indexed ZIP estimates, not utility tap samples. They help show local context without replacing a household test.
Monroe median
365 PPM
About the same1 indexed ZIP readings · Range 364.5–364.5 PPM
Indiana median
313 PPM
52 PPM higher472 indexed ZIP readings · Range 132–371 PPM
EPA benchmark screen
Contaminant snapshot
Available numerical results from associated SDWIS community water systems, compared with the applicable action level or federal MCL. Federal measured-value coverage is incomplete.
1 pass1 fail
Lead (PB90)
0 mg/L
Reported Dec 31, 2024
Copper (CU90)
2 mg/L
Reported Jun 30, 2004
Numerical coverage
2 comparable results
Missing values remain blank; absence is not treated as a pass.
Lead (90th percentile)
Measured in mg/L
Local 0
EPA limit 0.015
Copper (90th percentile)
Measured in mg/L
Local 2
EPA limit 1.3
Share of EPA benchmark
100% line = listed limit
2026Q2
- All records
- 3
- Health-based
- 0
- Active health-based
- 0
| Contaminant or rule | System | Status | Period |
|---|---|---|---|
| Gross Alpha, Excl. Radon and U | IN5201004 | Archived | Jan 1, 2026through Mar 31, 2026 |
| Radium-228 | IN5201004 | Archived | Jan 1, 2026through Mar 31, 2026 |
| Radium-226 | IN5201004 | Archived | Jan 1, 2026through Mar 31, 2026 |
No reported violation does not prove that every contaminant was tested or absent; SDWIS measured values are incomplete and lag state records.
Solutions matcher
Your personalized water action plan
Matched to Monroe ZIP 46772 using 364.5 PPM nearby hardness and 2 reported measurement benchmarks.
Scale protection
High-Capacity Whole House Water Softener
364.5 PPM is 3× the high-hardness trigger used by this matcher.
Designed to reduce scale on fixtures, water heaters, glassware, and plumbing throughout the home.
Compare whole-house systemsDrinking water protection
Under-Sink Reverse Osmosis System
Copper (90th percentile) has a measured benchmark flag or active health-based SDWIS record in this profile.
A certified multi-stage RO system targets a broader range of dissolved contaminants at the kitchen tap.
Explore under-sink filtrationAffiliate disclosure: we may earn a commission from qualifying purchases, at no added cost to you. Product matching is educational and does not replace certified water testing.
Frequently asked
Water questions for Monroe
Is tap water safe in Monroe?+
EPA ECHO shows no active health-based violation for the associated systems in this reporting snapshot. This does not prove every contaminant is absent; federal records can lag and household plumbing can change tap conditions.
How hard is the water?+
Nearby USGS observations produce an estimate of 364.5 PPM, or 21.3 grains per gallon, classified as very hard. This is not a household tap measurement.
Do I need a water softener?+
At 364.5 PPM, a correctly sized whole-house softener can reduce scale and hard-water spotting. It does not replace contaminant filtration.